Yokogawa YFGW410 - Manual (Page 96)

D3-35
IM 01W02D01-01EN
 Adding area information
When the [Add] button is clicked, the window shown in Figure D3-34 appears.
FD0334.ai
Figure D3-34 Area Settings Window
Item Description Default setting
Area Name
Set an area name. The default setting can be
changed.
Allocated in ascending order from
Area001
Network ID
Select this setting from the drop-down box, which
displays wireless networks set at the
Networks>.
The smallest ID of the network IDs
registered with the field wireless
network
Background Im-
age
Set a background image. Set an image such as a
map or floor plan of the installation area.
Blank
Description Enter description of the relevant area. Blank
When the [OK] button is clicked, the settings are reflected in the graphic registration list of the
main window. When the [Cancel] button is clicked, the setting information is discarded.
Multiple areas can be used for the same Field Wireless Subnet. In addition, the same device
icons can be allocated to other areas. For details about device icons, see “Area settings” in this
sub-section.
IMPORTANT
Background images must satisfy the following conditions to be imported.
Image size: 1000 x 450 pixels or less
File size: 1 MB or less
File format: jpeg, jpg, png