Yokogawa YFGW410 - Manual (Page 129)

D3-68
IM 01W02D01-01EN
When the [OK] button is clicked, downloading to the YFGW410 starts. When the [Cancel] button
is clicked, the warning dialog is closed.
When the download is complete, the window shown in Figure D3-69 appears.
FD0376.ai
Figure D3-69 Download Progress Window
When the [OK] button of the confirmation window is clicked, the window is closed and the window
shown in Figure D3-70 appears.
FD0377.ai
Figure D3-70 Download Result Window
Confirm that the results of all download processes are OK, and then click the [Close] button to
close this window.
 When changing settings and downloading in an operational state
Be aware of the following points when changing and downloading settings after starting operation
of the field wireless network.
• While YFGW410 communicates to set a publish configuration to field wireless devices, the
configuration download may be failed. To avoid this, confirm that the status of the target field
wireless devices that are changed configuration are Published, then execute the configura-
tion download.
• Changing a role of device from/to IO (Auto) requires restarting a target field wireless subnet.
• When deleting a routing device or changing a role from router, devices which is connected
under target routing device will leave from the network. If IO (Auto) device is used, confirm
before deleting that IO (Auto) device is not connected under target routing device.
• When changing configuration of field wireless network in an operational state, field wire-
less network resource will increase temporally. Even if the resource usage rate is less than