Yokogawa YFGW410 - Manual (Page 171)

D4-34
IM 01W02D01-01EN
Each item except the status field is same as Radio Firmware. The status field shows that if
firmware update is running, a progress is shown, otherwise “Detected” is shown.
Each button and notification are same as Radio Firmware. For details see a description of the
Radio Firmware part.
 Firmware update procedure
This sub-section describes a procedure of updating firmware as an example updating sensor
firmware.
In the [Sensor Firmware] tab shown in Figure D4-25, select the device to be updated. Click the
[Download Firmware] button to open the window shown in Figure D4-27.
For radio firmware and backbone device firmware downloads, this dialog does not appear.
FD0427.ai
Figure D4-27 Update Sensor Firmware Window
The TSAP ID and Object ID are already filled; do not change these. To select the firmware file for
the update, click right side the button of Firmware file field to open the Open Firmware File dialog
shown in Figure D4-28 for selecting the new firmware. In radio firmware and backbone device
firmware case, the Open Firmware File window is opened by clicking [Download Firmware] but-
ton.