Yokogawa YFGW410 - Manual (Page 132)

D3-71
IM 01W02D01-01EN
 Restore
This function restores saved backup file into the Configurator.
When [File] and then [Restore] are clicked, the window shown in Figure D3-73 appears.
FD0380.ai
Figure D3-73 Restore the Backup File Window
Select a file with the extension [.bkup] and then click the [Open] button. The configuration data is
imported into the Configurator. When the [Cancel] button is clicked, the window is closed.
If the backup file has a password, the window shown in Figure D3-74 appears when the [Open]
button is clicked.
FD0381.ai
Figure D3-74 File Passowrd Window
Enter the password specified when the configuration data was backed up, and then click the [OK]
button. The configuration data is imported. When the [Cancel] button is clicked, the window is
closed and the backup file is not imported.
Click the [Restore] button after confirming that all items are checked. Selecting restore items is
for the use of service personnel and is not required for ordinary inspection and management.