Yokogawa YFGW410 - Manual (Page 60)

D2-8
IM 01W02D01-01EN
IMPORTANT
When access control is enabled for the Field Wireless Management Console, the following error
is displayed in a dialog if an attempt is made to launch Configurator or Monitor from an unpermit-
ted IP Address:“Communication Error: Failed to send or receive data.”
For details of access control, see Sub-section D3.2.1 YFGW410 Settings.
l Launching Configurator
In the Field Wireless Management Console launch window, click the [Configurator] button to go
to the Login window, and then enter a User Name and Password. After you have successfully
logged in, the following window is displayed.
FD0205.ai
Figure D2-3 Configurator initial window
The operations of this window onwards are described in Chapter D3. Constructing a Field Wire-
less System, alongside the engineering details.
l Closing Configurator
To close Configurator, click the [x] button in the top right corner of the window, as shown in Figure
D2-3. You can also close Configurator by clicking the [File] menu in the top left of the window and
selecting [Exit], as shown in Figure D2-3. For details of operation, see Sub-section D3.2.11 Other
Setting Operations.