Yokogawa YFGW410 - Manual (Page 65)

D3-4
IM 01W02D01-01EN
IMPORTANT
The following addresses are used internally by the YFGW410: the IP addresses shown in the
chart above + 1. It is necessary to set IP Address settings such that there is no overlap with other
devices.
l Field Network1
When the YFGW410 is set for single operation and the [Field Network1] tab is selected, the tab
shown in Figure D3-2 appears in the main window.
FD0302.ai
Figure D3-2 Field Network1 Setting Tab (for Single Operation)
The IP address, subnet mask, default gateway address of Field Network1 are configured here.
The addresses of Field Network1 must always be set.
The [Default Gateway Address] specifies the IP address of the connection port for routers when
they are connected and connecting to systems on different network segment (Plant Resource
Manager(PRM), etc.) When a router is not used, we recommend setting the same address as the
IP address.
Default settings are shown below. Make changes as necessary.
Item Description Default setting
IP Address IP Address of Field Network1 192.168.0.101
Subnet Mask Subnet mask of Field Network1 255.255.255.0
Default Gateway
Address
Default gateway address of Field Network1 192.168.0.1