Yokogawa YFGW410 - Manual (Page 153)

D4-16
IM 01W02D01-01EN
 Restart device
This function provides to restart devices within the network forcely. When there is an operation
fault or problem in a device or communications path, this function may correct it. Before execut-
ing this function, must consider impacts on other devices and/or the host system. Especially in a
router device case, impacts for lower devices should be cared.
IMPORTANT
Do not execute this function while other the Configurator or the Monitor operations are running.
Check all operation is completed before execute this function. For detail of the Configurator and
the Monitor operation conflicts, see Sub-section D2.2.2 Launching the tool.
For a field wireless device, select [Restart Device] in the pop-up menu to open the window shown
in Figure D4-12.
FD0412.ai
Figure D4-12 Device Restart Window (in a field wireless device case)
In the window drop-down box select the restart type.
In a field wireless device case, there are two restart types, as follows.
Restart type Description
Warm Restart Restart the wireless communications module.
Restart as Provisioned Restart both wireless communications and sensor module.
After selecting the restart type, click the [OK] button to display the dialog shown in Figure D4-13.