Yokogawa YFGW410 - Manual (Page 155)

D4-18
IM 01W02D01-01EN
 Reading out device parameters (Read Object Attribute)
This function provides to read a device parameter specified ISA100.11a standard or device ven-
dor by manual. It requires three IDs to read: TSAP, Object and Attribute.
For the IDs to read out parameters, refer to the user’s manual for the field wireless device.
Select [Read Object Attribute] in the pop-up menu to open the window shown in Figure D4-14.
FD0414.ai
Figure D4-14 Read Object Attribute Window
Enter the TSAP ID, Object ID, and Attribute ID for the parameter to be read, and click the [OK]
button to reading the parameter. Clicking the [Cancel] button closes the window.
Check the TSAP ID, Object ID, and Attribute ID in the user's manual for the field wireless device.
IMPORTANT
Do not execute this function while other the Configurator or the Monitor operations are running.
Check all operation is completed before execute this function. For detail of the Configurator and
the Monitor operation conflicts, see Sub-section D2.2.2 Launching the tool.