beautypg.com

Part d system construction, D1. engineering procedures, D2.1 – Yokogawa YFGW410 User Manual

Page 50: D1-1

background image

D1-1

IM 01W02D01-01EN

Part D System Construction

This part describes the flow and work content of the engineering in order to construct a Field

Wireless System.

D1. Engineering Procedures

FD0101.ai

Engineering of host system

(CENTUM VP, FAST/TOOLS,

DAQSTATION, and so on)

System

engineer

Shippment

Field wireless device

(FieldMate)

Engineering of field wireless network

(Configurator and YFGW410)

Configuration data

download to YFGW410

(Configurator)

Engineering of YFGW510

(Field wireless access point setup tool)

YFGW410
YFGW510
YFGW610

installation

Check and adjust wireless connection

(Monitor)

Backup configuration data

(Configurator)

Save the communication quality data

(Monitor)

Set and adjust device parameters

(FieldMate PRM)

Loop check

Device management

Operation

Set device parameters

(FieldMate PRM)

Field wireless device installation

Provisioning file

Person in

charge of devices

Person in

charge of devices

Person in

charge of devices

Person in

charge of devices

User or

startup engineer

Maintenance staff

Operators

Start-up

Backup file

User or

startup engineer

Startup engineer or

wireless engineer

Person in

charge of devices

Startup engineer or

wireless engineer

Startup engineer or

wireless engineer

Startup engineer or

wireless engineer

Modbus

registers file

Figure D1-1 Engineering Flow for Wireless System Construction

The explanations in this document are based on the assumption that all engineering in the net-

work construction is executed after the delivery of the components for the Field Wireless System

to the customer. When Yokogawa Electric Corporation receives an order that includes the engi-

neering, the procedure may differ from the flow shown in Figure D1-1.
As shown in Figure D1-1, in order to construct a Field Wireless System that has been specifically

designed according to a customer’s request, the following types of engineering are necessary:

(1) Provisioning and setting of the field wireless device
(2) Construction of the Field Wireless System
(3) Engineering of the host system