Yokogawa YFGW410 - Manual (Page 69)

D3-8
IM 01W02D01-01EN
The IP address, subnet mask, default gateway address of Field Network1 are configured here.
The [Default Gateway Address] specifies the IP address for routers when they are connected
and connecting to systems on different network segment (Plant Resource Manager(PRM), etc.)
When a router is not used, we recommend setting the same address as the [Virtual IP Address].
Default settings are shown below. Make changes as necessary.
Item Description Default setting
Virtual IP Address
Virtual IP address of Field Network 1 connecting from the
host system
192.168.0.101
UNIT1 IP Address
The IP Address of Field Network1 of the YFGW410 connect-
ed to the UNIT1 connector of the cable for redundancy.
192.168.0.102
UNIT2 IP Address
The IP Address of Field Network1 of the YFGW410 connect-
ed to the UNIT2 connector of the cable for redundancy.
192.168.0.103
Subnet Mask Subnet mask of Field Network1 255.255.255.0
Default Gateway
Address
Default gateway address of Field Network1 192.168.0.1
IMPORTANT
Always connect the host system to Field Network1.
l Field Network2/3
When the YFGW410 is set for redundant operation and the [Field Network2] tab is selected, the
tab shown in Figure D3-6 appears at the main page.
FD0306.ai
Figure D3-6 Field Network2 Setting Tab (for Redundant Operation)