Maple Systems PC419C - Manual (Page 69)

Page 57 1010-1023, Rev 00
Step 4: Unfasten the internal elevated platform screws (
605H
Figure 4-6).
Figure 4-6: PC415C Internal Elevated Platform Screws
Step 5: Slide the elevated platform out of the chassis. Step 0:
4.6 PSU Module Replacement
Please read the warnings at the beginning of Section 4.3 before attempting to access any
PC400C Series Panel PC internal components.
If the PSU module has been damaged it must be replaced. To replace the PSU module,
please follow the steps below.
4.6.1 Remove the Old PSU
Step 1: Remove the back cover (Section
606H
3.5).
Step 2: Detach and remove the elevated platform (Section
607H
4.5).