Maple Systems PC419C - Manual (Page 60)

1010-1023, Rev 00 Page 48
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.
3.12.7 USB 3.0 Connectors
The USB 3.0 ports are for attaching USB 3.0 peripheral devices to the system. The
pinouts of the USB 3.0 port are shown below:
Pin Description Pin Description
1 USB3_PWR1 10 USB3_PWR2
2 USB2P0_DM1 11 USB2P0_DM2
3 USB2P0_DP1 12 USB2P0_DP2
4 GND 13 GND
5 USB3P0_RXDN1 14 USB3P0_RXDN2
6 USB3P0_RXDP1 15 USB3P0_RXDP2
7 GND 16 GND
8 USB3P0_TXDN1 17 USB3P0_TXDN2
9 USB3P0_TXDP1 18 USB3P0_TXDP2
Table 3-10: USB 3.0 Port Pinouts
3.12.8 VGA Connector
The VGA connector connects to a monitor that accepts VGA video input. The pinouts of
the VGA connector are shown below:
Figure 3-30: VGA Connector
Pin Description Pin Description
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND