Figure 4-1: so-dimm module locations, Figure 4-2: so-dimm module installation – Maple Systems PC419C User Manual
Page 67
Page 55
1010-1023, Rev 00
Figure 4-1: SO-DIMM Module Locations
Step 3:
Release the SO-DIMM module by pulling both the spring retainer clips outward
from the socket.
Step 4:
Grasp the SO-DIMM module by the edges and carefully pull it out of the socket.
Step 5:
Install the new SO-DIMM module by pushing it into the socket at an angle
Step 6:
Gently push the rear of the SO-DIMM module down (Figure 4-2). The spring
retainer clips clip into place and secure the SO-DIMM module in the socket.
Figure 4-2: SO-DIMM Module Installation