Figure 3-4: installing the pci riser card, Figure 3-5: expansion slot retention screw – Maple Systems PC419C User Manual
Page 39
Page 27
1010-1023, Rev 00
Figure 3-3:
Installing the PCI Riser Card
Step 3:
Remove the expansion slot cover. The expansion slot on the I/O panel
interface is secured to the system with a single retention screw. Remove the
screw (Figure 3-4).
Figure 3-4: Expansion Slot Retention Screw
Step 4:
Insert the expansion card. Align the PCI expansion card edge connector with
the PCI expansion slot on the PCI riser card. Gently insert the PCI card into the
PCI expansion slot.