Maple Systems PC419C - Manual (Page 103)

Page 91 1010-1023, Rev 00
 Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On D EFAULT Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled Normal POST messages displayed

Enabled D EFAULT OEM Logo displayed instead of POST messages
 Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS
D EFAULT Sets display mode to force BIOS.

Keep
Current
Sets display mode to current.