Ounting the, Ystem, 1 wall mounting – Maple Systems PC419C User Manual
Page 43: 10 mounting the system
Page 31
1010-1023, Rev 00
3.10 Mounting the System
WARNING!
When mounting the PC400C Series Panel PC, it is advisable to have
more than one person help with the installation to prevent accidental
damage to the panel and avoid personal injury.
The methods of mounting the PC400C Series Panel PC are:
Wall mounting
Panel mounting
Arm mounting
Stand mounting
Rack mounting
The mounting methods are described in the following sections.
3.10.1 Wall Mounting
To mount the PC400C Series Panel PC onto a wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four bracket screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 3-10).