Lincoln Electric IM10178 POWER FEED 84 U.I. CONTROL BOX - Manual (Page 73)

B-37
OPERATION POWER FEED 84, POWER FEED 84 DUAL
gouging Kit
eleCtriC shoCK can kill.
• if the wire feeder is turned on with the
process switch in the gouging position,
the welding output will turn on.
------------------------------------------------------------------
The Power Feed 84 is available from the factory with the gouging kit
installed.
The gouging kit includes a mounting stud for attaching a gouging
torch and two contactors to electrically isolate the gouging torch while
welding, and to isolate the welding head while gouging.
The contactors automatically switch from the wire drive to the
gouging stud when a gouging, stick or TIG mode is selected. If two
single wire drives with gouging kits are connected to one power
source, then only one wire drive at a time may be selected for
gouging.
The gouging kit is not available for dual wire drives.
WARNING
FIGURE B.33
WIRE FEED GOUGING
ROCKER SWITCH
GOUGING STUD
(COVER NOT SHOWN)
W
IR
E
DR
IV
E
CO
NT
AC
TO
R
CO
NT
AC
TO
R
ELECTRODE IN
WIRE DRIVE
GOUGING TORCH
WELDING GUN