beautypg.com

Lincoln Electric IM10178 POWER FEED 84 U.I. CONTROL BOX User Manual

Page 38

background image

B-2

OPERATION

POWER FEED 84, POWER FEED 84 DUAL

recoMMended processes and eQuipMenT

recoMMended processes

• GMAW, GMAW-Pulse, GMAW-STT

• FCAW

• SMAW

• GTAW

• CAG

process liMiTaTions

• Processes must be within the duty cycle and rating of the wire

feeder.

eQuipMenT liMiTaTions

• The Power Feed 84 does not operate with LincNet Power

Sources.

• The power source may require a software update.

• If the Power Feed 84 has contactors or a gouging kit installed, the

power source software may require updated.

• Does not include weld cables

• Operates on 40 VDC input

• The user interface may be located a maximum of 200 feet away

from the wire drive.

• Must use newer gun adapter kits. Not compatible with K1500-1,

K1500-2, K1500-3, K1500-4 K1500-5 and K489-7 gun adapter
kits.

• A remote control/foot amptrol and a push-pull gun may not be

connected to the Power Feed 84 single simultaneously.

• Power Feed 84 user interfaces are not compatible with Power

Feed 10M wire drives.

• Power Feed 84 wire drives are not compatible with Power Feed

10M user interfaces.

• The Power Feed 84 with contactors or gouging kit may not be

connected to a system with a robotic wire drive.

• With the Power Feed 84, only one USB port may present

anywhere in the system.

recoMMended poWer sources

Power Wave 355M
Power Wave 455M
Power Wave 455M/STT
Power Wave 655R
Power Wave S350
Power Wave S500
Power Wave S700
Power Wave R350
Power Wave R500
Power Wave i400

This manual is related to the following products: