Socket head cap screw – Lincoln Electric IM10178 POWER FEED 84 U.I. CONTROL BOX User Manual
Page 23

A-16
INSTALLATION
POWER FEED 84, POWER FEED 84 DUAL
8. Select the appropriate guide tube and secure with the set screw
9. Slide the Oxo or FastMate gun adapter into the wire drive and
secure with the thumb screw.
10. For FastMate gun adapters, connect the trigger pigtail to the
connector on the front of the feeder.
rotating the Wire drive
1. Turn power OFF at the welding power source.
2. Locate the socket head cap screw at the bottom of the wire drive.
Loosen, but do not remove the screw.
3. Rotate the wire drive to the desired position and tighten the screw.
Wire size
Number of grooves in guide tube
.023-.045” ( 0.6 – 1.2mm)
1
.045 – 1/16” (1.2 – 1.6 mm)
2
1/16 – 5/64” (1.6 – 2.0 mm)
3
.068 – 7/64” (2.0 – 2.8 mm)
4
SET SCREW
GUIDE TUBE
SOCKET HEAD CAP SCREW
FIGURE A.21
FIGURE A.22