Recall: press 1 second save: press 2 seconds – Lincoln Electric IM10178 POWER FEED 84 U.I. CONTROL BOX User Manual
Page 58
B-22
OPERATION
user Memories
Recall a memory with memory buttons
To recall a user memory, press one of the six user memory buttons.
The memory is recalled when the button is released. Do not hold the
button for more than two seconds when recalling a user memory.
Recall a memory with the gun trigger
If desired, memories 2 through 8 can be recalled with the gun trigger.
For example, to recall memory 3, quickly pull and release the gun
trigger 3 times without welding. Note: the Power Feed 84 is factory
set with this feature disabled. Use the SETUP menu and change P.4
to enable memory recall with the gun trigger.
Save a memory with memory buttons
To save a memory, press and hold the desired memory button for two
seconds. When the button is initially pressed, the corresponding LED
will illuminate. After two seconds, the LED will turn off. Do not hold
the button for more than 5 seconds when saving a user memory.
Note that memories may be locked in the set-up menu to prevent
accidental overwrite of the memories. If an attempt is made to save a
memory when memory saving is locked, the message "Memory save
is Disabled!" will appear briefly in the display.
POWER FEED 84, POWER FEED 84 DUAL
Recall:
Press 1
second
Save:
Press 2
seconds