Lincoln Electric IM10178 POWER FEED 84 U.I. CONTROL BOX User Manual
Page 61
B-25
OPERATION
usb operaTion
Memories
The USB port may be used to load and store memories. Memories
are stored on the USB device as a set of 8 memories. The memory
set may be given a custom name by using PowerWave Manager or
program.
When a USB device is plugged in, the display will momentarily show
“USB Device detected”.
To load memories from the USB:
1. If a dual wire drive or two single wire drives are present, select
the active wire drive
2. Rotate the center knob and press the right button to select the
desired memory set.
Access to the USB device is also possible by using P.37 from the set-
up menu.
To save memories to the USB:
1. Enter the set-up menu and select P38
2. Press the right button for “yes” or the left button to cancel
Note that when memories are saved, the memories include
information about limits and 2-step/4-step trigger.
POWER FEED 84, POWER FEED 84 DUAL