Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 89)

SierraNet M408 User Manual 87
Trigger and Filter Settings in Easy Mode Teledyne LeCroy
Auto Calibration
Click the Auto Calibration Settings.... button to display the Auto Calibration dialog.
Figure 2.60: Auto Calibration Dialog
Set the parameters for the following:
 Port # ‐ Select the port.
 Time Intervals(ms) ‐ Select the time interval from the drop‐down list.
 Target Eye Width(%) ‐ Select the target eye width from the drop‐down list.
 Fine Tune Threshold(%) ‐ Select the fine tune threshold from the drop‐down list.
 PRBS Type ‐ Select value from the drop‐down list.
 Status ‐ Progress bar indicating the status of calibration.
 Calibrate ‐ Select Transceiver, Splitter or Transceiver & Splitter from the drop‐
down list.