Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 User Manual
Page 200
LeCroy Corporation
InFusion Scenarios
198
SierraNet M408 Protocol Analyzer User Manual
TABLE 4.1: Events and their Descriptions (Ethernet )
Event
Description
User Patterns
Most Recent
Lists the most recent Events.
New User Group
Lists the new user groups.
Presets
Timers/External
Timer
The Event occurs when the timer expires.
Other Trigs
Analyzer: the Event occurs when the Analyzer triggers.
External: the Event occurs when the external Trigger In is
asserted.
Basic
Basic Link Service
Refer to section
Link Control Frame
Refer to section
“Link Control Frame” on page 94
.
Link Speed
The Event occurs when the link is at the specified speed.
Both Linkup
The Event occurs when both ports are out of electric idle.
Dword Matcher
Refer to section
Training Sequence
Inject Error on Control: Generates Manchester Coding
violation on Control field bits corresponding to the defined
mask: One means violation, and zero means no error.
Inject Error on Status: Generates Manchester Coding
violation on Status field bits corresponding to the defined
mask: One means violation, and zero means no error.
Frame Marker Error: Generates training sequence with an
invalid frame marker.
Recode Manchester Coding: Forces jammer to recalculate
Manchester Coding for each bit of training frame.
FCP
FCP SCSI Command
Refer to section
FCP Frame Information
Unit
Refer to section
.
SCSI Command Status
Refer to section
FCP Task Management
Refer to section
“FCP Task Management” on page 95
ELS
Extended Link Service‐
Request
Refer to section
Extended Link Service‐
Request, Reply
Refer to section
Extended Link Service‐
Reply
Refer to section
GS