Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 24)

Teledyne LeCroy Launching Your Analyzer
22 SierraNet M408 User Manual
Figure 1.11: Easy/Advanced Mode Toggle Button
1.5.3 Add Device to Project
After you start the software, select File > New Project to open Add Device to Project
dialog. The following Add Device to Project dialog displays (see
Figure 1.12 on page 23 ).
The colors in the ‘Location’ column mean the following:
 Red: Firmware and/or BusEngine components need to be updated to the latest
version
 Light Blue: The device is ready to be connected.
 Yellow: The device is locked.
 Green: The software is connected and ready to run
Select a device with “Ready to connect” status.
If the device supports more than one protocol, select the desired protocols from the
drop‐down list in the Port column.
Select the port configuration from the Link Assignment column.
Click OK to connect to the device.
Switch to Advanced Mode Toggle Button