Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 109)

SierraNet M408 User Manual 107
Trigger and Filter Settings in Easy Mode Teledyne LeCroy
Enter the values for the Ether header, FIP Header and the count of the expected number
of occurrences. Check the Check All box to select ports P1 through P8 or individually
select ports.
The following FIP patterns are available:
 Discovery Solicitation from ENode
 Discovery Solicitation from FCF
 Discovery Advertisement
 FIP FLOGI Request
 FIP FLOGI LS_ACC
 FIP FLOGI LS_RJT
 FIP NPIV FDISC Request
 FIP NPIV FDISC LS_ACC
 FIP NPIV FDISC LS_RJT
 FIP Fabric LOGO
 FIP Fabric LOGO LS_ACC
 FIP Fabric LOGO LS_RJT
 FIP ELP Request
 FIP ELP SW_ACC
 FIP ELP SW_RJT
 FIP Keep Alive
 FIP Clear Virtual Links
 FIP VLAN Request
 FIP VLAN Notification
2.6.8 MPCP Pattern
Double‐click Multi control Protocol Frame to open the dialog.