Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 40)

Teledyne LeCroy Starting a New Project
38 SierraNet M408 User Manual
2.1 Starting a New Project
To start a new project, click File > New Project from the Analyzer menu options, or click
on the Hide Menubar icon and select File > New Project (see Figure 2.2) to display
the Add Device to Project dialog (see Figure 1.9 on page 20 ). Select the desired analyzer
and click OK.
Note: Click Alt to toggle between showing/hiding the top menu bar.
Figure 2.2: Starting a New Project
Figure 2.3: Starting a New Project