Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 202)

LeCroy Corporation InFusion Scenarios
200 SierraNet M408 Protocol Analyzer User Manual
FCVI(DISCONNECT_RQST) Refer to section “FCVI Patterns” on page 100.
FCVI(CONNECT_RESP1) Refer to section “FCVI Patterns” on page 100.
FCVI(CONNECT_RESP2) Refer to section “FCVI Patterns” on page 100.
FCVI(CONNECT_RESP3) Refer to section “FCVI Patterns” on page 100.
FCVI
(DISCONNECT_RESP) Refer to section “FCVI Patterns” on page 100.
FCAV
FCAV(Simple)
Refer to section “FCAV Patterns” on page 100.
FCAV(Extended) Refer to section “FCAV Patterns” on page 100.
VSAN
Basic
VSAN‐Basic Link Service Refer to section
“Basic” on page 100.
VSAN‐Link Control Frame Refer to section “Basic” on page 100.
FCP
VSAN‐FCP SCSI
Command
Refer to section “FCP” on page 100.
VSAN‐FCP Frame
Information Unit Refer to section “FCP” on page 100.
VSAN‐SCSI Command
Status Refer to section “FCP” on page 100.
VSAN‐FCP Task
Management Refer to section “FCP” on page 100.
ARB
VSAN‐ARB Loop
Initialization
Refer to section “FCP” on page 100.
ELS
VSAN‐Extended Link
Service‐Request
Refer to section “FCP” on page 100.
VSAN‐Extended Link
Service‐Reply Refer to section “FCP” on page 100.
GS
VSAN‐Generic Link
Service‐Request
Refer to section “GS Patterns” on page 102.
VSAN‐Generic Link
Service‐Reply Refer to section “GS Patterns” on page 102.
SW
VSAN‐Switch Internal
Link‐Request
Refer to section “SW Request” on page 104.
VSAN‐Switch Internal
Link‐Reply Refer to section “SW Reply” on page 104.
FICON
Event Description