Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 27)

SierraNet M408 User Manual 25
Launching Your Analyzer Teledyne LeCroy
Add Device...
Click Add Device to add a device with a static IP address.
Figure 1.16: Add Device with Static IP Dialog
Remove Device
Click Remove Device to remove a previously added device.
IP Settings
Click IP Setting to reset IP settings of a device. The following IP Setting dialog displays.
Figure 1.17: IP Setting Dialog
Update Device
Click Update to update a device (see “Update Device” on page 32 ).