Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 62)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
60 SierraNet M408 User Manual
Figure 2.29: Trigger Settings Dialog
Choose a Parameter
To choose a parameter for capture from any of these categories, highlight the category in
the parameter window and click the +>> button to add the selection. You can also drag
and drop a pattern. This opens selection dialogs for each of the categories displaying all
of the parameters for that category. All patterns added appear in the Project Overview.
2.6.2 Filter Tab
You can drag and drop patterns from the Filter Library pane into the Active Pane. You can
select the pattern and use the Add and Remove arrows to move patterns between the
Patterns Library and the Active pane (see Figure 2.30).The following filtering options are
available:
Include and Exclude arrows
Click the X icon
to delete
previously set
Trigger Filter
Settings Click this
icon to Rename
Current Trigger
Capture Setting Click the + icon to
use previously set
Trigger Filter
Settings
Include and Exclude arrows