Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 112)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
110 SierraNet M408 User Manual
2.6.11 Internet Protocol Pattern
Double‐click Any IP Frame to open the dialog.
Figure 2.72: IP Frame Dialog
Enter the values for the Ether header, IP Header and the count of the expected number of
occurrences. Check the Check All box to select ports P1 through P8 or individually select
ports.
Other Internet Protocol patterns available are:
 IP Frame (ICMP)
 IP Frame (IGMP)
 IP Frame (IPV6)
 IP Frame (OSPF)
 IP Frame (AH)
 IP Frame (ESP)
 IP Frame (PIM)
 IP Frame (UDP)
 IP Frame (TCP)