Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 54)

Teledyne LeCroy Analyzer Settings
52 SierraNet M408 User Manual
About
Displays the current Net Protocol Suite information, see “About” on page 190 .
Figure 2.19: Help Menu Option
2.5 Analyzer Settings
The Teledyne LeCroy Ethernet Protocol Suite Analyzer Settings panel in the application
has six functional sections as shown below. The application is designed such that the user
starts from the left pane and moves to the right pane to connect to a device and record a
capture as listed below.
Figure 2.20: Analyzer Settings Panel
1. Device: Enables adding and assigning a device
2. Port Status: View the port status
3. Session Controller: Start and Stop recording
4. Recording Settings: Manage the recording settings such as Number of Segments
and Segment Size.
5. Trigger and Filter Settings: Enables Trigger and Filter settings
2.5.1 Device Pane
The Device pane allows you to add or remove a device in the chain of attached devices
and assign each device to a different project (see
Figure 2.21 on page 53 ). You can have
multiple projects assigned to different devices. A single project will automatically connect
to an active device. Right‐click on a device and select Activate to start the device.
1 3 4 5 2