Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 71)

SierraNet M408 User Manual 69
Trigger and Filter Settings in Easy Mode Teledyne LeCroy
Timers/External
Timer
You can set a timer independently of any other trigger selection, to cause an
unconditional trigger after a set time.
Double‐click Timer in the Pattern window to open the Add Timer Pattern dialog.
Check a Time Unit, enter the Timer Value, and click OK.
Figure 2.40: Timer Pattern Dialog
Note:
The timer resolution is limited to one DWORD. The minimum value is 12‐13 DWORD.