Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 221)

SierraNet M408 Protocol Analyzer User Manual 219
Scenario Example LeCroy Corporation
Figure 4.14: Adding an Event
4. The Event is added to the Global Rules panel (see Figure 4.15 on page 219 ).
5. Select Replace DWORD in the Action panel and place it in the Global Rules panel
(see Figure 4.15 on page 219 ).
6. Right‐click the New Scenario 0 tab and select Rename and enter the name in the
Library panel as shown in Figure 4.16 on page 220
Figure 4.15: Global Rules