Teledyne LeCroy SierraNet M408 User Manual Ver.1.40 - Manual (Page 144)

Teledyne LeCroy Advanced Mode (User‐Defined)
142 SierraNet M408 User Manual
Setting Triggers
The trigger icon toggles between a blue outline and no outline, activating and
deactivating it. Click the Trigger icon to activate the trigger. Once the trigger is
activated the no outline trigger icon turns to blue outline.
External Output Trigger
The external output trigger icon toggles between a blue outline and no outline, activating
and deactivating it. The External Output Trigger icon (no outline) indicates there is no
change. Click to activate the trigger. Once the trigger is activated the icon has a blue
outline indicating it is active.
Figure 2.91: Setting Triggers
6. Define each selected pattern in the same way as in Easy Mode, as described in
“Ethernet Patterns (Easy Mode)” on page 67 . To use a timer, define it first.
Note: You can copy a frame from the spreadsheet view and paste it for triggering.
Note: You can set a timer for any If or Else If condition.