IAI America RCM-GW-CC - Manual (Page 98)

94
The following shows an example that a remote I/O exclusive one station is set to the station No.1 and gateway
unit is set to the station No.2.
(1) Remote I/O
[1] Master station ← Gateway unit
Master station
Remote I/O station
(Station No. 1: Exclusive
one station)
Gateway unit
RCM-GW-CC
(Station No. 2: Exclusive
four stations)
Buffer address Remote input (RX)
For station No. 1
For station No. 2
For station No. 3
For station No. 4
For station No. 5
For station No. 6
For station No. 7
For station No. 8
For station No. 9
Output
[2] Master station → Gateway unit
Master station
Remote I/O station
(Station No. 1: Exclusive
one station)
Gateway unit
RCM-GW-CC
(Station No. 2: Exclusive
four stations)
Buffer address Remote output (RY)
For station No. 1
For station No. 2
For station No. 3
For station No. 4
For station No. 5
For station No. 6
For station No. 7
For station No. 8
For station No. 9
Input
* Not used for the system area.