Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 88)

Section 7: Fieldbus Interface
05/11 89 51209 Revision 2
7.3.6 Register 5: Device Type and Software Release
Only reading is permitted.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 TYPE MSB
Byte 1 TYPE LSB
Byte 2 MAINVERSION
Byte 3 SUBVERSION
E.g. 5220 Rel 1.23 = 52200123
hex
7.3.7 Register 6: Board Number
Only reading is permitted.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 Board number MSB
Byte 1 ""
Byte 2 ""
Byte 3 Board number LSB
E.g. 148388723 = 08D83B73
hex
7.3.8 Register 7: (Reserved)
7.3.9 Register 8 ...15: Weight Data
Only reading is permitted.
The gross, net and tare weight are stored as DINT fixpoint.
The real data value is derived from DINT and EXPO as follows :
Value
Real
=reading
DINT
*10
(-EXPO
Register 8 Current gross value
Register 9 Current net value, if tared; otherwise gross
Register10 Current tare value, if tared, otherwise 0
Register11 Value on the front-panel display
Register12 Reserved
Register13 Reserved
Register14 Max (FSD)
Register15 Reserved (free)
7.3.10 Register 22 ... 27: Limit Values (Read/Write)
Register 22 Limit 1 on
Register 23 Limit 1 off
Register 24 Limit 2 on
Register 25 Limit 2 off
Register 26 Limit 3 on
Register 27 Limit 3 off