Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 28)

Section 5: Commissioning
05/11 29 51209 Revision 2
5.2 Switching on the Instrument
The instrument can be put into operation and calibrated using a PC with the VNC program (on the
CD packed with the instrument), an Internet Browser or the ConfigureIt program.
5.2.1 Resetting the Instrument, Activating 'DHCP'
The instrument can be reset using a pin with a diameter of 1.0 mm
(e.g. paper clip).
By actuating during approx. 1 second, the program is re-started.
When actuating during approx. 3 seonds, 'DHCP' is activated in the
instrument (independent of the previous settings). This ensures that a
valid address for identification of the instrument in the network can be
assigned to the instrument by a server.