Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 68)

Section 5: Commissioning
05/11 69 51209 Revision 2
5.9.9 Transferring the Current Data Set or Selected Parameters to the Instrument
Click [ConfigureIT]-[Save to device] to save parts of or the
overall configuration in the instrument.
After selecting, define the
parameters to be transferred by
clicking [>] or [>>] (for all
parameters).
Click [OK] to start the transfer.
5.9.10 Resetting the Instrument to Default
Select [ConfigureIt]-[Reset to default] to reset the instrument
to default. For transferring to the instrument, continue with
chapter 5.9.9.
5.9.11 Exporting a Data Set as a Printable File
Select [File]-[Print] to transmit the data set to a printer, or to save it in a
file.