Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 51)

Section 5: Commissioning
05/11 52 51209 Revision 2
5.6.4 Fieldbus Parameters
Setup
Serial ports parameter
Operating parameter
Fieldbus parameter Press and
to select [Fieldbus parameter]
This menu item can only be selected if the instrument is a PR5220/01 or a PR5220/04 version.
The instrument version automatically determines the corresponding protocol:
[Profibus-DP] for PR5220/01 and [DeviceNet] for PRPR5220/04.
Dependent on the interface type, additional parameters are required:
[Profibus-DP]
Setup/Fieldbusparameter
Protocol Profibus-DP
Profibus-DP Address 1
[DeviceNet]
Setup/Fieldbus
Protocol DeviceNet
DeviceNet baudrate 500k Press to select 500, 250 or 125 k.
DeviceNet MAC-ID 1 Select address 1 ... 62
Closing the menu
Save changes ?
To close the menu, press . Reply [Yes] to save the data,
or [No] to close the menu without changing data.