Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 16)

Section 3: Installing the Instrument
05/11 17 51209 Revision 2
3 Installing the Instrument
•
Before starting work, please read Chapter 1 and follow all instructions.
Further procedures:
•
Check the consignment: unpack the components specific to the application.
•
Safety check: inspect all components for damage.
•
Make sure the on-site installation is correct and complete including cables, e.g. power cable fuse
protection, load cells, cable junction box, data cable, console/cabinet, etc.
•
Follow the instructions for installation of the unit relating to application, safety, ventilation, sealing
and environmental influences.
•
Connect the cable from cable junction box or platform/load cell.
•
If applicable: connect other data cables, network cables, etc.
•
Connect the instrument to the supply voltage.
•
Check the installation.