Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 73)

Section 6: SMA Protocol
05/11 74 51209 Revision 2
6.3.10 Request for Taring with Fixtare Value
Command
:
T
Reply: The scale makes a taring attempt using the fixtare value and signals the
tared status in the and characters.
For details, see Chapter 6.6.1 .
6.3.11 Request for Zero Setting of the Scale
Command
:
Z
Reply: The scale makes a zero setting attempt and signals the zero status in the
character.
For this function, the stability condition must be met. The maximum waiting time for
stability is set under [Tare timeout]; see Chapter 5.4.19.
For details, see Chapter 6.6.1 .
Unless the scale is in the zero setting range, an error reply is generated.
6.3.12 Request for Tare Resetting
Command
:
C
Reply: The scale deletes the tare weight and signals the tare reset status in the status
character. The scale tare is reset.
For details, see Chapter 6.6.1 .
6.3.13 Scale Diagnosis
Command
:
D
Reply: The scale starts the diagnosis and returns a diagnosis reply.
For details, see Chapter 6.6.1 .