Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 63)

Section 5: Commissioning
05/11 64 51209 Revision 2
5.9.2 Starting the Program
If the program has already been installed previously (see Chapter 5.3), it can
be started using the icon on the desktop:
5.9.3 Creating a New Project
Select [File]-[New]-[ConfigureIt Project].
Enter the project name (this is the name of the folder) and
press [Next >].
Select the device type: define PR5220 and a configuration
name (file) and press [Finish] to continue.