Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 61)

Section 5: Commissioning
05/11 62 51209 Revision 2
5.9 ConfigureIt Professional
The ConfigureIt Professional program has the following features:
- Searching for an instrument in a network
- Creating and modifying an instrument configuration
- Entering the parameters of an instrument
- Calibration of an instrument using the following methods:
-
with test weights
- by mV/V
- using the load cell data (‘smart calibration’)
- Loading an instrument configuration from an instrument
- Storing an instrument configuration in an instrument or in a file
- Copying instrument configurations (cloning)
- Creating a document (PDF, XLS, etc.) with the instrument configuration
5.9.1 Installation
The installation is done from the CD-ROM delivered with the instrument. It is recommended to close
further application programs running on the PC. For installation, approx. 150 Mbytes are required
on the hard disk. The minimum is 256 Mbytes working memory; a 2GHz processor needs approx. 5
minutes installation time.
Start the program ConfigureIt Professional ... Setup.exe:
Next step for installation
Return to previous step
Cancel the installation process
Instructions for closing further application programs
Read the license agreement and click [I accept the
agreement] to confirm acceptance.