Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 65)

Section 5: Commissioning
05/11 66 51209 Revision 2
5.9.5 Establishing the Communication to the Instrument
The Navigator area contains the 'Mixhouse' folder with the
configuration file 'Charge.cfg'. After double clicking
[Charge.cfg] and clicking [Login] once the interface can be
selected via [ConfigureIt] -[Communication Parameter].
Click [Search Device] to find all devices of the same type
in the network. If the address of the instrument is known, it
can be entered directly into [IP-Address].
The instruments of the selected type found in the network
appear and the instrument to be configured can be
selected; press [OK] to continue.
The Ethernet address of the selected instrument is taken
over.
Select [ConfigureIt]-[Connect Device] to start the
communication to the instrument.