Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 66)

Section 5: Commissioning
05/11 67 51209 Revision 2
5.9.6 Transferring a Data Set from the Instrument to the PC
Click [ConfigureIt]-[Load from Device]. The complete data
set (including the calibration data and parameters) is
transferred from the instrument to the PC.
5.9.7 Saving the Current Data Set on the PC
Select [File]-[Save as]; the complete data set (including
the calibration data and parameters) is saved in a file.
Select a folder and define a new name for the file.
The file [Charge old.cfg] is added under [Mixhouse].
The configuration can be found e.g. in the following folder on the PC using the Explorer: