Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 8)

Section 1: Safety Information
05/11 9 51209 Revision 2
1 Safety Information
The instrument was in perfect condition with regard to safety features when it left
the factory. To maintain this condition and to ensure safe operation, the operator
must follow the instructions and observe the warnings in this manual.
1.1 Intended Use
The instrument is intended for use as an indicator for weighing functions. Product operation,
commissioning and maintenance must be performed by trained and qualified personnel who are
aware of and able to deal with the related hazards and take suitable measures for self-protection.
The instrument reflects the state of the art. The manufacturer does not accept any liability for
damage caused by other system components or due to incorrect use of the product.
1.2 Initial Inspection
Check the content of the consignment for completeness and inspect it visually for signs of damage
that may have occurred during transport. If there are grounds for rejection of the goods, a claim must
be filed with the carrier immediately and the sales or service organization must be notified.
1.3 Before Commissioning
Visual inspection:
Before commissioning and after and storage or transport, inspect the instrument
visually for signs of mechanical damage.
1.3.1 Installation
The instrument is designed for mounting on standard rails (35 mm, acc. to DIN 46277).
When mounting on the rail, please make sure that the distance from other
instruments left and right of the module is at least 20 mm.
1.3.2 Electrostatically Sensitive Components
This instrument contains electrostatically sensitive components. For this reason, an equipotential
bonding conductor must be connected when working on the open instrument (antistatic protection).