Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 69)

Section 5: Commissioning
05/11 70 51209 Revision 2
Transmitting the print file to a printer or selecting the data
format of the data set for saving.
5.9.12 Operating the Instrument Using the Browser (VNC Program)
Start the browser with [ConfigureIt]-[Activate Browser].
The program can be operated in the same manner as if
started directly; see Chapter 5.3.2.
5.9.13 Closing the Program
Before closing the program, make sure that:
- The correct configuration was saved in the instrument
- The configuration of the instrument was saved as .CFG file
- The configuration data were filed as a print-out (e.g. PDF), or printed
To close the program, select [File]-[Exit], or click: