Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER - Manual (Page 11)

Section 2: PR 5220 Ethernet Transmitter Series
05/11 12 51209 Revision 2
2.2 Overview of the Instrument
- EC test certificate / type approval applied for
-
Accuracy 10,000 e @ 6 samples/sec
- Internal resolution: 7.5 million counts
- Linearity: < 0.002%
-
Sampling rate: 6 ... 100/sec selectable
- Digital filter with selectable characteristic
-
Electrically isolated interfaces
- 3 programmable pairs of limit values
- 24 VDC supply voltage connection
-
Connection using plug-in terminal blocks
- Socket for LAN adaptor
-
Port for Profibus (/01)
- The instrument is provided for snap-on mounting on a
standard rail.
-
5 status LEDs für supply voltage, communication, error
detection
Calibration and configuration of the instrument are menu guided
using a PC, or by Profibus commands (PR 5220/01 only).
-
Calibration with weight, using the mV/V method or with load
cell data (“smart calibration”)
-
0/4 ... 20 mA analog output, configurable for gross/net
weight
- Analog value via Profibus (PR 5220/01 only)
-
3 digital input channels, electrically isolated
- 3 digital output channels, electrically isolated
Communication protocols:
- RS-422 for remote display
-
RS-485 for SMA protocol
- Profibus-DP (PR 5220/01 only)
- DeviceNet (PR 5220/04 only)
2.3 Label on the Housing
A label with the wiring diagram is located on one side of the instrument: