Micromod MOD: 30ML Functions Data Base Reference - Manual (Page 8)

MOD 30ML Functions
INTRODUCTION
To simplify configuration, the instrument has resident templates that can be used to configure
basic control schemes. These templates and their setup are described in the operation book.
Use of the templates allows you to configure an instrument without using a separate
configuration program.
1.4 RELATED DOCUMENTATION
Information about this instrument and its operation can be found in:
• IB-1800R-OPR – Operation/Setup, MOD 30ML
Information about this instrument and its configuration can be found in:
• IB-23G600 – Database Reference for Logic Functions - Book 1
• IB-23G602 – Database Reference for Logic Functions - Book 2
• IB-23G601 – Database Reference for Advanced Control Functions
• Vizapp.hlp – On-line help for Visual Application Designer (ViZapp)
• IB-VIZAPP-TUT – ViZapp Training Manual
Information about this instrument and its installation can be found in:
• IB-1800R-INS – Installation, MOD 30ML
• IB-1800R-M30 – MOD 30 Replacement Installation, MOD 30ML
• IB-23C601 – Installation, Remote I/O Modules
Additional ICN connection and loading information can be found in the following:
• IB-23A160 – Instrument Communications Network (ICN) Planning
Users developing interface software to this instrument will also need the following:
• IB-23G001 – ICN Communication Link Programmer’s Manual
1.5 VERSION IDENTIFICATION
To verify the version level of the instrument, check the version number marked on the PROM
label of the identity module. The firmware version is a digit in the catalog number as follows:
Catalog Number Description for 1800P
BASE NUMBER
1800P MOD 30ML Control Identity Module
UNUSED Z Unused Character
ELECTRICAL CODE 10 General Purpose, standard
FUNCTION 1 MOD 30ML
FIRMWARE VERSION 02 Version 2
MODEL A Design Level (512K PROMs)
C Design Level (512K Flash RAM)
Sample Number 1800PZ10101C (Product is serialized)
Version number identification for specific blocks is obtained through the database.
1-2