GF Signet 8900 Multi-Parameter Controller - Manual (Page 20)

20 Signet 8900 Multi-Parameter
7.3 Menu Directory
•
Select this item to exit View and go to the Menu Directory.
• The Menu Directory may also be reached from any item in View by pressing and holding the ENTER button for two seconds.
• The Menu Directory provides access to the seven separate menus of the 8900: System Setup, Channel Settings, Hold Inputs,
Relay, Output, Calibration, and Options.
• The content and utility of each of these menus is described in the following pages.
• There is a 10 minute timeout from this item back to the fi rst measurement display screen.
Menu Directory:
>
Menu Directory:
System Setup
7.2 System Confi guration
• Selecting this item will initiate an auto-scrolling inventory of the plug-in modules installed in the unit.
Sensor Inputs:
# of channels
System Config:
>
Outputs 1 & 2:
type or "None"
Power:
VAC or VDC
Comm/Out 3 & 4:
type or "None"
Relays 1 & 2:
type or "None"
External Relays:
detected or not
Outputs 1 & 2:
type or "None"
• The order in which items appear is as follows:
• To advance more quickly to the next screen, press any button during the auto-scrolling sequence.
• There is a 10 minute timeout from this item back to the fi rst measurement display screen.